Product Description
YTM05-MAZ1 | Includes: l Module unit for Mazda l Mazda plug | iPod cable l AUX cable | ||
Compatible Models | Mazda (without navigation) | 2003-2008 Mazda 2, 2004-2008 Mazda 3 , 2006-2009 Mazda 5(without entertainment system) , 2006-2008 Mazda 6 (see note 3), 2009 Mazda 6(Panasonic),2003-2008 Miata/MX5(non Bose) , 2002-2006 SPD, 2002-2003 Protégé, 2007-2008 CX7 (non Bose) ,2004-2008 RX8(see note 4) , 2002-2006 Tribute, 2002->2008 Premacy,1999-2003 Mazda 323 , 2002-2011 MPV ,2003-2006 B-Series Pickup, | |
Compatibility Notice | 1: Fits following head units: 1168, 1269, 4103, 14789909, 1472086, 14792089, 14794008, 14794522, 14795137, CQ-EM4570AK, CQ-LM4720A, CQ-TT3070AA, CR-LM4282KA, CR-LM4282KA CD, CQ-XM8950A 2:Not compatible with Navigation radios. Not compatible with MX5 with Bose Sound System; 3: Not all Mazda 6 supports external CDC connection, internal modification might be needed; Mazda 6, produced from Nov. 2003 to Sep. 2005, needs to solder a jumper or a 0-ohm chip register on location L716 in its head unit. 4: RX-8 radio firmware version must be v9.55 or later, v10.1 and v9.81 not supported. (Note to check the radio firmware is available). | ||
iPod Car Adapter(YT-M05)
Customs code(HS code):8522909100
Size:
Module unit: 75.5 x 58 x 20.5mm
iPod cable: 50cm; AUX cable:50cm;
For iPod/AUX cable ,120cm size is optional.
CDC plug:95cm
Packing box: 210 x 150 x 60mm
Net weight: 90g;
Gross weight:300g;
50units/big carton
Introduction:
This is a digital integration kit between your iPod (iPhone) and OEM car stereo system for many vehicles. It is a replacement of CD changer. It can be easily installed and used. The installation and usage are the same as CD changer's installation and usage. Simply plug iPod to our car adapter , you can play audio through car audio system and enjoy music in your car.iPod car adapter insures CD quality sound from iPod/iPhone to the car stereo speakers.
Features:
l Plug&Play
Direct connection via CD changer port, Keep the original look of your car interior
l Line Level Audio
Deliver high-fidelity line level audio output from your iPod to your factory
car stereo.
l Integrated Controls
Allows you to control music,browse playlists and change tracks from your
iPod/iPhone/iPad,radio buttons and
steering wheel controls.
l Charges iPod/iPhone
Always keeps your iPod/iPhone charged and ready to go. Charges 5V/12V models.
l AUX Input
Connects any external audio device
l Works with iPhone/iPad.Call in reminding via radio speaker
l Last Position Memory. Automatically resumes CD play from the last point if there is interruption to CD play
l Supports Apple iTune’s playlists as Virtual CDs. Text capable on most radios of Toyota Lexus BMW etc
l Specific,not universal.
Different module firmware versions for different types of OEM head units’ protocol
Specification:
l Voltage Input : 12V DC
l Signal-to-Noise : 95DB
l Max. Current : 600MA
l Max. Voltage output : 12V
l D/A Device : 24BIT 192KHZ
l Total Harmonic Distortion : 0.01%
l Frequency Response : 20HZ-20KHZ
l Working Temperature : -10C- 80C
compatible with following iPod/iPhone models (Including Charging):
iPhone 2G 3G 3GS 4G 4GS
iPod touch 1st, 2nd, 3rd and 4th generations
iPod nano 1st, 2nd, 3rd, 4th, 5th and 6th generations
iPod Mini 1st, 2nd generations
iPod Video, iPod Photo, iPod Classic 4th, 5th and 6th generations
Compatible with iPad iPad2 (Does not charge iPad/iPad2 unless iPad's screen is sleeping, charges slowly)
Note: The interface can only connect to the iPod shuffle via the 3.5mm Aux input
Operating instructions:
Connect your i-Pod to the interface via the supplied cable, power on the radio and switch to CD changer as the source, it will then switch to your iPod and is now ready to use.
(1).iPod interface has two operating modes:
1. Hybrid Mode
2. Playlist Mode
The Disk # buttons on your factory radio allow you to switch between the above two modes. Depending on the model of your radio the disk buttons could be represented by numbers 1,2,3,4,5,6 or on some models Disk # are selected via the Disk+ Disk- buttons. Please refer to the user guide provided with your car radio for further information and to familiarise yourself with the functions of your particular radio and the procedure for disk # selection.
(2).For most car radios, the following operations will be supported:
l Disk Change
CD(Disk+ - ) Button------ Operation
1. Disk #1 ------ Switch to Hybrid Mode,play all music files of iPod as one CD
2. Disk#2-> ------ Switch to Playlist Mode,play iTune's playlists as virtual multi CDs
Disk #2 ------ Playlist 1
Disk #3 ------ Playlist 2
Disk #4 ------ Playlist 3
Disk #5 ------ Playlist 4
Disk #6 ------ Playlist 5
And so on
l Next track/Previous track
When "Next track" button is pressed on car stereo, iPod will jump to the next song and car stereo track number will represent song number in a current playlist. And Vice Versa.
l Fast Forward/ Fast Reverse
When "Fast Forward" button is pressed, iPod will start rewinding current track forward. Time on car stereo will represent actual position within the audio track. And Vice Versa.
l Play/Pause
The iPod will automatically start play or pause.
l Disk / Mode / CDC / SOURCE / AUX or FM/AM
It will switch between YATOUR and FM/AM
FAQ for iPhone/iPod Usage: How-to-create-playlists-in-itunes?
