Product Description
|
YTM06-TOY2 |
Includes: l Module unit for Toyota l Toyota Small(6+6) plug l AUX cable | ||
|
Compatible Models |
TOYOTA |
4Runner 2003-2011, Avalon 2005-2011, Camry 2005-2011, Celica 2003-2005, Corolla 2005-2011, FJ Cruiser 2007-2010, Highlander 2004-2011, Landcruiser 2003-2011, Matrix 2005-2011, MR2 2004-2010, Prius 2004-2011, RAV4 2003-2011, Sequoia 2005-2011, Sienna 2004-2010, Solara 2004-2008, Tacoma 2005-2011, Tundra 2004-2011, Venza 2009-2011, Vitz 2006-2010, Yaris 2006-2011 | |
|
SCION |
xA (2004+), xB (2004+), tC (2005+) | ||
|
LEXUS |
ES 300/330 2007-2011, IS 250/300/350 2006-2011, GS 300/400/430/450H 2006-2011, GX 470 2004-2009, LS 460 2007-2011, LX 570 2008-2011, RX 300/330/350/400H 2004-2009, SC 430 2005-2010 | ||
|
Compatibility Notice |
1.Toyota Y cable(YT-TYY) is optional when CD changer port is occupied by NAV, existing CD Changer or XM 2.Fits Toyota OEM radios by Panasonic and Matsushita: 16852 ,12821 ,13803 ,17006 ,17828 ,50323 ,53816 ,53818 ,58814 , 58816 ,58827, P3914 ,P3916 ,P7809 , A56828 , W53901 ,W53903, W53905, W58810, W58814, W58824, W58831, B9002 Navigation System, etc 3.Compatible with Toyota Navigation System 4. Supports ID3 tag(text display) | ||
|
Not work with |
Toyota Vios(Asia version with Radio 52867) 2006-2010 | ||
If the CD changer port of your radio is occupied, you need to buy a Y cable (YT-TYY) to bridge.

Installation guidance:
1, Plugs in to the back of the Car Stereo. It uses CD changer port of your stereo.
2, Plug-and-play operation.
3, Works as an AUX Input converter for any MP3 player.
To remove your existing car radio, You may be able to find more information via websites or by contacting a dealer/qualified installer.

Digital Music Changer(YT-M06)
Customs code(HS code):8522909100
Size:
l Module size: 92 x 65 x 16.5mm
l CDC plug length:95cm; AUX cable length: 50cm
l Packing box: 210 x 150 x 60mm
l Module weight: 90g;
l Gross weight:300g-400g;
l 50units/big carton

Introduction:
This is a Audio car kit. It is a replacement of CD changer. It can be easily installed and used. The installation and usage are the same as CD changer's installation and usage, Simply plug in USB disk/SD card, you can play audio through car audio system and enjoy music in your car.
Specification:
l Voltage Input : 12V DC
l Signal-to-Noise : 95DB
l Max. Current : 600MA
l Max. Voltage output : 12V
l D/A Device : 24BIT 192KHZ
l Total Harmonic Distortion : 0.01%
l Frequency Response : 20HZ-20KHZ
l Working Temperature : -10C- 80C
l Module case is made of aluminium alloy

Features:
1. Plug&play, modular design,CDC alternative
2. Connected with wire harness, not FM signal controlled ,Hi-Fi guanranteed
3. Controlled by vehicle Head Unit,support Steering wheel operation
4. With Hi-Fi Decoding Chip,perfectly support MP3 and WMA tracks
5. Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
6. Supports external audio source(MP4 PSP Mobile Phone) via AUX in port
7. Playlist function same as multi CDs
8. Supports Last Position Memory(LPM)
9. Vibration and interference proof
10. Easy to install,no damage to original car decoration
11. Different module firmware versions for different types of protocol of car stereos

Supported memory cards and USB sticks:
1.Max 8GB (2GB is most recommended);SD card is more recommended than USB stick.
2.Please format USB stick or SD card with FAT16 or FAT32 format before you save files and folders in USB/SD.
3. Imposed folder naming system: CD01, CD02, CD03 ....
Doesn't read sub-folder and gets confused with other names in root of the drive.
4.Supports up to 15 folders (depending on the radio type) on your USB/SD.
5.Any number of songs can be stored in each folder, but the display of most radio models can only screen 99 track titles; Saving too big file(over 50MB) in any folder may also cause intermittent performance
6.Using music files formats other than WMA and MP3 may also cause intermittent performance.
7. The playback order of songs is in line with their created date.
8.Sometimes,to remove defect on software of car audio system, you may need to disconnect the battery or remove the fuse to reset the car audio system.
9.To use the Aux-In port, it's necessary to remove the USB or SD card.
10.YT-M06 may does not work with some of new Kingston brand USB stick.



